How it works
With an Aquazerve installed on your pool equipment you are putting the pool "in-line" with your irrigation system. Simply put, the water runs through your swimming pool first and then to irrigation. Maintaining a constant fresh water feed through your pool means you will never again need to drain your pool due to high TDS. The water savings is the amount of water you would normally discharge to waste during the draining process.
The AQUAZERVE operates off of pressure developed by your existing pool filtration system. The unit is mounted on the return line of your pool system, directly after your pool filter. The water is pressurized by your pool pump and delivered to irrigation through 1/4" tubing.
The amount of water needed to control the TDS will depend upon many variables, such as; weather, swimmer load, type of pool, depth and surface area of pool, debris and foliage in and around pool, type and amount of chemicals used, etc.. The flow rate is controlled by 1 GPH pressure compensating emitter heads, number of emitter heads and amount of time pool pump is running.
The AQUAZERVE operates independently from your existing irrigation system. When using water from the AQUAZERVE to water plants, you simply close the bubbler head on existing irrigation where an AQUAZERVE emitter head has been placed.
The concept, you cannot use Chlorinated pool water on vegetation, is completely false. When Chlorine comes in contact with Oxygen, it immediately returns to it's original state, which is a gas, and dissipates into the atmosphere. The Chlorine will never reach the root system of the plant nor will it ever contaminate the soil.
At present we are watering thousands of plants with the AquaZerve.
Click on the links below for some examples of plants grown with the AquaZerve system.
